2026 Harley-Davidson® Street Glide® in Lincoln, NE

Front view of a blue 2026 Harley-Davidson Street Glide ridden on an open highway in Lincoln, NE.

The 2026 Harley-Davidson® Street Glide® is engineered as a touring motorcycle with a focus on consistent power delivery, stable chassis dynamics, and integrated rider systems. The model designation FLHX reflects its configuration within the touring lineup, incorporating a frame structure, suspension system, and drivetrain calibrated for extended riding conditions. The motorcycle measures 94.9 inches in length, 38.4 inches in width, and 53.1 inches in height, establishing a long and stable profile suited for highway use and controlled maneuvering at lower speeds.

The seat height measures 26.4 inches in the laden position and 28.1 inches unladen, supporting rider accessibility and balance. Ground clearance is set at 5.5 inches, allowing sufficient clearance for standard road conditions. The wheelbase extends to 64 inches, contributing to directional stability and predictable handling. Steering geometry includes a rake of 26 degrees, a fork angle of 29.25 degrees, and a trail measurement of 6.7 inches, all of which influence steering response and tracking consistency during straight-line travel and cornering.

Milwaukee-Eight® 117 Engine Configuration and Output Characteristics

The 2026 Harley-Davidson® Street Glide® uses the Milwaukee-Eight® 117 engine, configured with a displacement of 117 cubic inches or 1,923 cubic centimeters. The bore measures 4.075 inches and the stroke measures 4.5 inches, producing a compression ratio of 10.3 to 1. This configuration supports consistent combustion efficiency and torque generation across a wide operating range.

The engine produces 105 horsepower at 4,600 revolutions per minute and generates 130 foot-pounds of torque at 3,250 revolutions per minute. This output supports sustained acceleration and load-bearing capability during extended rides. The valvetrain uses a pushrod-operated overhead valve design with hydraulic self-adjusting lifters and four valves per cylinder. This design reduces the need for frequent manual adjustments and maintains consistent valve timing.

Fuel delivery is controlled through Electronic Sequential Port Fuel Injection, which meters fuel based on engine demand and operating conditions. The lubrication system is pressurized and uses a dry-sump configuration to maintain oil circulation under varying lean angles and speeds. The air intake system includes a washable fiberglass air cleaner, supporting long-term maintenance efficiency. Exhaust flow is managed through a 2-1-2 dual exhaust system with tapered mufflers, designed to maintain balanced exhaust pressure and consistent output.

Transmission, Clutch System, and Drivetrain Ratios

The drivetrain integrates a 6-Speed Cruise Drive® transmission, engineered to provide a wide range of gear ratios suitable for both acceleration and highway cruising. The transmission is paired with a mechanically actuated assist and slip clutch that reduces lever effort and limits rear wheel instability during downshifts.

Power transfer begins with a primary chain drive using a 34 to 46 ratio. Final drive is managed through a belt system with a 32 to 68 ratio, reducing maintenance requirements while maintaining efficient torque delivery. The gear ratios are calibrated to provide progressive acceleration across all six gears. First gear is set at 9.593, followed by second at 6.65, third at 4.938, fourth at 4.0, fifth at 3.407, and sixth at 2.875. These ratios allow the engine to operate within an efficient range during both low-speed and high-speed operation.

Frame Construction and Structural Integrity

The frame is constructed from mild steel using a tubular design with a two-piece stamped and welded backbone. The structure incorporates cast and forged junctions for strength at critical connection points. Twin down-tubes support the engine placement, while a bolt-on rear frame with forged fender supports allows modularity in rear section components.

The swingarm is also constructed from mild steel using a two-piece drawn and welded section with forged junctions. This configuration supports rear wheel alignment and suspension stability under load. Welding is completed using MIG processes, ensuring consistent structural integrity across all joints.

Suspension Components and Ride Control

The front suspension uses a 49 millimeter Dual Bending Valve fork system. This design improves damping characteristics by separating compression and rebound forces, allowing controlled response over uneven surfaces. The rear suspension uses dual outboard emulsion shocks with preload adjustability. This allows the rider to adjust suspension stiffness based on load conditions such as passenger weight or luggage.

Front suspension travel measures 4.6 inches, while rear suspension travel measures 3 inches. These values support a balance between ride comfort and handling precision. The suspension system is calibrated to maintain tire contact with the road surface during acceleration, braking, and cornering.

Wheel and Tire Specifications

The 2026 Harley-Davidson® Street Glide® uses cast aluminum wheels for both front and rear configurations. The front wheel has a diameter of 19 inches and a width of 3.5 inches. The rear wheel measures 18 inches in diameter with a width of 5 inches. This staggered configuration contributes to stability and traction.

Tires are Dunlop® Harley-Davidson® Series bias blackwall types. The front tire specification is 130/60 B19, while the rear tire specification is 180/55 B18. These dimensions provide a stable contact patch and support load distribution across varying riding conditions.

Braking System Design and Performance

The braking system uses dual front floating rotors paired with four-piston fixed calipers. The rear braking system uses a single rotor with an axially mounted caliper. The front rotors measure 12.6 inches in diameter with a thickness of 0.18 inches, while the rear rotor measures 11.8 inches in diameter with a thickness of 0.28 inches.

Anti-lock Braking System functionality is included as standard equipment, regulating brake pressure to prevent wheel lock during sudden braking. Electronic Linked Braking distributes braking force between the front and rear wheels to maintain stability and reduce stopping distance.

Electrical System and Power Management

The electrical system includes a sealed maintenance-free 12 volt battery rated at 28 amp-hours with 405 cold cranking amps. Charging is handled by a three-phase 58 amp system capable of producing up to 754 watts of power. This output supports all onboard electrical systems, including lighting, infotainment, and accessory ports.

The starting system uses a 1.6 kilowatt electric starter motor with solenoid engagement, ensuring consistent engine start-up under varying conditions. The motorcycle also includes a USB-C power outlet rated at 15 watts, located in the media storage compartment for device charging.

Lighting Systems and Visibility

Lighting components use LED technology across all primary systems. The headlamp, tail and stop lights, and turn signals are all LED-based. LED lighting provides consistent illumination while reducing power consumption and increasing component lifespan. This configuration supports visibility in low-light conditions and improves signal clarity for surrounding traffic.

Integrated Infotainment and Display Systems

The infotainment system operates on Skyline™ OS and is displayed through a 12.3 inch full-color TFT screen. This display integrates vehicle data, navigation, and media controls into a single interface. The system supports Apple CarPlay® connectivity through both wired and wireless connections, allowing integration with compatible mobile devices.

Audio output is delivered through two 5.25 inch fairing-mounted speakers, each powered at 50 watts per channel. The system supports Bluetooth® connectivity for phone and media functions, as well as USB input for external media devices. Navigation is embedded within the system and includes traffic and weather data when connected through a Wi-Fi hotspot.

The display also includes a vehicle information screen that provides data such as air temperature, oil pressure, and engine idle temperature management system status. Digital gauges are integrated into the display, reducing the need for separate analog instrumentation.

Rider Safety Systems and Control Technologies

The 2026 Harley-Davidson® Street Glide® incorporates multiple rider safety systems designed to improve control under varying conditions. Anti-lock Braking System and Electronic Linked Braking are standard features. The Traction Control System regulates rear wheel spin during acceleration, while the Drag-torque Slip Control System manages rear wheel behavior during deceleration.

Vehicle Hold Control assists in maintaining position on inclines by holding brake pressure after the rider releases the brake lever. A Tire Pressure Monitoring System provides continuous feedback on tire pressure levels.

Cornering control systems include Cornering Anti-lock Braking, Cornering Electronic Linked Braking, Cornering Traction Control, and Cornering Drag-torque Slip Control. These systems adjust performance based on lean angle, supporting stability during cornering maneuvers.

Fuel Capacity and Efficiency Metrics

The fuel tank has a capacity of 6 gallons, with a reserve capacity of 1 gallon indicated by a warning light. Fuel economy is estimated at 44 miles per gallon under combined city and highway conditions. This level of efficiency supports extended travel between refueling intervals.

Practical Touring Dimensions and Load Capacity

The 2026 Harley-Davidson® Street Glide® has a weight of 774 pounds as shipped and 811 pounds in running order. Gross vehicle weight rating is set at 1,360 pounds, with a front axle rating of 500 pounds and a rear axle rating of 927 pounds. Luggage capacity measures 2.42 cubic feet, supporting storage for extended trips.

Schedule a Test Ride Today

We invite riders to examine the technical configuration of the 2026 Harley-Davidson® Street Glide® in person at Tower's Frontier Harley-Davidson® in Lincoln, NE. A test ride allows direct evaluation of the Milwaukee-Eight® 117 engine output, the responsiveness of the 6-speed transmission, and the function of integrated safety systems such as traction control and linked braking. Riders can assess the infotainment interface, suspension response, and braking performance under controlled conditions. Our team is available to provide detailed explanations of system operations and assist with setup for different riding preferences. Schedule a test ride to review the motorcycle specifications and experience how each system operates together during operation.