2026 Harley-Davidson® Street Bob® near Omaha, NE

Red 2026 Harley-Davidson Street Bob parked on city street near Omaha NE

The 2026 Harley-Davidson® Street Bob® combines a Milwaukee-Eight® 117 Classic engine, a six-speed transmission, a tubular mild-steel frame, and a focused selection of electronic rider aids. Its powertrain produces 120 pound-feet of torque and 98 horsepower while using Electronic Sequential Port Fuel Injection to manage fuel delivery. A dual-bending valve telescopic fork and hidden coil-over monoshock control suspension movement, while cast aluminum wheels and Dunlop® Harley-Davidson® Series tires support the chassis. Standard rider safety equipment includes an Anti-lock Brake System, a Traction Control System, a Drag-Torque Slip Control System, a Tire Pressure Monitoring System, and cornering-enhanced versions of several control functions. The motorcycle also incorporates LED lighting, a four-inch analog speedometer with digital information, and a USB Type-C power outlet.

Milwaukee-Eight® 117 Classic Engine and Performance

The powertrain of the 2026 Harley-Davidson® Street Bob® centers on the Milwaukee-Eight® 117 Classic engine and its supporting fuel, intake, exhaust, and lubrication systems. Harley-Davidson® pairs the engine with a mechanical wet clutch, a 6-Speed Cruise Drive® transmission, and a belt final drive. This complete arrangement provides a defined path for power delivery from the engine to the rear wheel. Published torque and horsepower figures establish the engine’s documented output at specific operating speeds. The associated capacities and drive ratios provide additional technical context for the motorcycle’s operation.

Engine Architecture and Output

The Milwaukee-Eight® 117 Classic engine displaces 117 cubic inches, or 1,923 cc. Its bore measures 4.075 inches, or 103.5 mm, and its stroke measures 4.5 inches, or 114.3 mm. The engine operates with a compression ratio of 10.3:1. Its valve system uses pushrod-operated overhead valves with hydraulic, self-adjusting lifters and four valves per cylinder. This configuration defines the primary internal dimensions and valve arrangement of the 2026 Harley-Davidson® Street Bob® engine.

The engine produces 120 pound-feet, or 163 Nm, of torque at 2,500 rpm under the J1349 testing method. Rated output reaches 98 horsepower, or 73 kW, at 4,600 rpm. The published figures place the listed torque output at a lower engine speed than the rated horsepower output. This separation identifies the specific points in the engine’s operating range at which the two listed values occur. The performance figures are nominal and may vary by country and region.

Electronic Sequential Port Fuel Injection manages the fuel supply. The specified fuel recommendation is 91 octane or higher based on the (R+M)/2 rating method. A nine-inch round air cleaner features a center-bolt cover and washable fiberglass filter media. Exhaust gases travel through a 2-into-1 system with the catalyst positioned in the header. These components support the engine through electronically controlled fueling, filtered airflow, and a defined exhaust layout.

The engine uses a pressurized dry-sump lubrication system with an oil cooler. Oil capacity with the filter is five quarts. The dry-sump arrangement and oil cooler form part of the standard Milwaukee-Eight® 117 Classic engine configuration. 

Clutch, Transmission, and Final Drive

A mechanical 10-plate wet clutch controls the connection between the engine and transmission. The clutch incorporates assist and conventional functions. Power then passes through the 6-Speed Cruise Drive® transmission. The six ratios provide a measured progression from the lowest gear to the highest gear. This drivetrain configuration supports the engine with six forward transmission speeds and a dedicated mechanical clutch assembly.

The overall first-gear ratio is 9.311, followed by 6.454 in second gear and 4.793 in third gear. Fourth gear has an overall ratio of 3.882, while fifth gear uses a 3.307 ratio. The overall sixth-gear ratio is 2.790. These figures document the complete ratio sequence available through the six-speed transmission. The progressively lower numerical ratios show the specified transition across all six gears without requiring estimates or supplemental calculations.

The primary drive uses a chain with a 34/46 ratio. The final drive uses a belt with a 32/66 ratio. Transmission lubricant capacity is one quart, while primary chaincase capacity is 1.25 quarts. These separate capacities correspond to the transmission and primary-drive assemblies. Together, the chain primary drive, wet clutch, six-speed gearbox, and belt final drive form the complete documented power-transfer system.

Fuel Capacity and Economy

The fuel tank holds 3.5 gallons, or 13.2 liters. The fuel-injection warning light corresponds to a listed reserve capacity of one gallon, or 3.8 liters. Estimated city and highway fuel economy is 47 mpg, equivalent to 5 liters per 100 km. This estimate provides the published reference for the motorcycle’s fuel consumption. The specifications do not provide a separate total riding-range figure.

Frame, Suspension, Wheels, and Braking

The 2026 Harley-Davidson® Street Bob® uses a steel chassis supported by telescopic front suspension and a concealed rear monoshock. Its steering geometry combines a 30-degree rake, a 30-degree fork angle, and 6.2 inches of trail. Differently sized front and rear cast-aluminum wheels carry model-specific Dunlop® Harley-Davidson® Series tires. A single front brake and a rear brake provide the listed braking hardware, with ABS included as standard equipment. These systems collectively define the motorcycle’s structure, suspension movement, wheel fitment, steering measurements, and mechanical braking configuration.

Frame and Steering Geometry

The frame uses mild-steel tubular construction with a rectangular-section backbone. Stamped, cast, and forged junctions connect the frame structure, and MIG welding secures the specified assemblies. Harley-Davidson® also uses forged-aluminum fender supports in the chassis configuration. The swingarm consists of mild-steel tubular sections with a stamped crossmember and forged axle junctions. It is MIG welded and includes a removable belt spacer.

The steering-head rake measures 30 degrees, and the fork angle also measures 30 degrees. The trail measures 6.2 inches. The wheelbase spans 64.2 inches. Right and left lean angles are both rated at 28.5 degrees under the J1168 testing method. These measurements document the 2026 Harley-Davidson® Street Bob® steering geometry and equal lean-angle ratings on both sides.

Front and Rear Suspension

A 49 mm telescopic fork manages front-wheel movement. The fork incorporates dual-bending valve technology, aluminum fork triple clamps, a dual-rate spring, and gaiter covers. Front suspension travel measures 5 inches. Each listed component forms part of the standard front suspension assembly. The specifications do not identify a separate optional front fork.

At the rear, the motorcycle uses a hidden free-piston coil-over monoshock. The shock provides 43 mm of stroke and includes cam-style preload adjustment. Total rear suspension travel measures 3.4 inches. The concealed installation integrates the single shock into the rear chassis layout. The specifications do not list a separate optional rear shock.

Wheels and Tires

Black Annihilator cast-aluminum wheels are standard at the front and rear. The front wheel measures 19 inches in diameter and 2.5 inches in width. The rear wheel measures 16 inches in diameter and three inches in width. Painted-aluminum tubeless laced wheels are listed as an optional wheel style, although standard and optional wheel availability may vary by country and region. The two wheel sizes work with specifically sized front and rear tires.

Dunlop® Harley-Davidson® Series bias blackwall tires fit the documented wheel configuration. The front uses a D401F tire with a 100/90B19 57H specification. The rear uses a D401T tire with a 150/80B16 77H specification. These tire dimensions correspond to the 19-inch front wheel and 16-inch rear wheel. The listed model names, construction type, and sizes define the standard tire equipment for the 2026 Harley-Davidson® Street Bob®.

Braking Equipment

The front brake uses a four-piston fixed caliper, while the rear uses a two-piston floating caliper. A single 11.8-inch rotor serves the front brake. The front rotor measures 0.2 inch in thickness. The rear rotor measures 11.5 inches in diameter and 0.23 inch in thickness. Both brakes use solid, uniform-expansion rotors.

The Anti-lock Brake System is standard. Its inclusion places electronic brake control alongside the specified front and rear calipers and rotors. The braking package combines independent front and rear brake hardware with conventional and cornering-enhanced anti-lock functions.

Dimensions, Seating, and Vehicle Capacities

The dimensions of the 2026 Harley-Davidson® Street Bob® establish its overall footprint, seat position, ground clearance, and wheelbase. Published weight figures distinguish its shipped condition from its running-order condition. Vehicle and axle ratings provide certified load limits for the complete motorcycle and each axle. Fluid capacities cover fuel, engine oil, transmission lubricant, and the primary chaincase.

Exterior Measurements and Seat Height

The motorcycle measures 91.3 inches in overall length. Its overall width is 36.4 inches and its overall height is 45.7 inches. The laden seat height measures 25.8 inches based on a 180-pound, or 81.7 kg, operator. Unladen seat height is 26.8 inches. These figures define the principal exterior dimensions and the seat’s specified height in both laden and unladen conditions.

Static ground clearance measures 4.9 inches. The equal 28.5-degree lean-angle ratings add a separate measurement for right-side and left-side clearance. No low-position or high-position seat measurements are listed for this model. The specifications also provide no Adaptive Ride Height measurements. The documented ergonomic information therefore centers on the standard laden and unladen seat heights.

Weight and Axle Ratings

The 2026 Harley-Davidson® Street Bob® weighs 622 pounds as shipped. Its weight in running order is 646 pounds. The Gross Vehicle Weight Rating is 1,160 pounds. Gross Axle Weight Rating is 450 pounds at the front and 730 pounds at the rear. These certified values identify the motorcycle’s published weight and axle limits.

No luggage-capacity volume is specified. The fuel tank, oil system, transmission, and primary chaincase account for the listed functional capacities. Fuel capacity is 3.5 gallons, engine oil capacity with the filter is five quarts, and transmission capacity is one quart. Primary chaincase capacity is 1.25 quarts. These measurements provide exact service-related capacity information without assigning an unsupported cargo figure to the motorcycle.

Electrical Equipment, Instrumentation, and Rider Safety

Electrical and electronic equipment on the 2026 Harley-Davidson® Street Bob® focuses on starting, charging, lighting, operating information, device power, and rider assistance. A sealed AGM battery supplies electrical energy, while a three-phase charging system supports the motorcycle during operation. LED technology covers the primary headlamp and signal-light functions. A four-inch analog speedometer includes digital readouts for vehicle data and system status. The rider safety package combines standard control technologies with cornering-enhanced functions.

Battery and Charging System

The 2026 Harley-Davidson® Street Bob® uses a sealed, maintenance-free absorbed glass mat battery. It is rated at 12 volts and 17.5 Ah, with 310 cold-cranking amps at 0 degrees Fahrenheit. A 1.6 kW electric starter uses solenoid-shift motor engagement. The three-phase charging system produces 364 watts at 13 volts and 900 rpm. Maximum charging output reaches 624 watts at 13 volts and 2,000 rpm.

These specifications document the battery capacity, cold-cranking rating, starter output, and charging performance at two engine speeds. The AGM design forms part of the motorcycle’s standard electrical configuration. The charging system’s lower-speed and maximum-output values provide defined references for electrical generation. The electric starter supplies the documented means of starting the engine. Together, these components support the motorcycle’s starting and electrical-power requirements.

LED Lighting and Device Power

An all-LED headlamp provides low-beam, high-beam, and signature-position lighting in accordance with applicable country regulations. LED bullet turn signals serve as the front signal lights. At the rear, bullet-style LED units combine stop, tail, and turn-signal functions. The complete documented lighting arrangement therefore uses LED technology for forward illumination and signaling. Auxiliary lamps are not included.

A USB Type-C power outlet supplies five volts at 2.4 amps. This outlet is the model’s listed connection for powering compatible external equipment. The electrical equipment remains focused on essential vehicle functions, LED lighting, instrumentation, and USB power.

Instruments and Vehicle Information

A 4-inch analog speedometer serves as the primary instrument. Its digital functions display the selected gear, odometer reading, fuel level, ride modes, heated-gear status, traction-control status, ABS status, TPMS information, and cruise-control information. The display also includes a clock, trip information, estimated range, and tachometer indication. This arrangement combines an analog speed reading with digital operating and system information. Riders can access multiple vehicle-status indicators through a single gauge assembly.

The gauge identifies both basic motorcycle data and the status of several rider-assistance functions. Fuel level, range, and trip information provide operating references during a ride. Gear and tachometer indications supply drivetrain and engine-speed information. ABS, traction control, and TPMS indicators communicate the status of the associated safety systems. The clock and heated-gear indication complete the listed digital functions.

Rider Safety Enhancements

Standard rider safety enhancements include the Anti-lock Brake System, Traction Control System, Drag-Torque Slip Control System, and Tire Pressure Monitoring System. ABS helps address wheel lock during braking within its operating limits. Traction control manages excessive driven-wheel slip during acceleration. Drag-torque slip control addresses rear-wheel slip related to excessive powertrain deceleration. TPMS provides tire-pressure information through the motorcycle’s instrumentation.

Cornering Enhanced ABS is also included. The model adds Cornering Enhanced Traction Control and Cornering Drag-Torque Slip Control. These cornering-enhanced functions supplement the corresponding standard systems by accounting for motorcycle dynamics during cornering. The complete package focuses on anti-lock braking, driven-wheel traction, deceleration-slip management, and tire-pressure monitoring.

Visit Tower's Frontier Harley-Davidson® for a Test Ride

Schedule a test ride at Tower's Frontier Harley-Davidson® near Omaha, NE, to experience the functional characteristics of the 2026 Harley-Davidson® Street Bob®. Our team can help you examine the Milwaukee-Eight® 117 Classic engine, six-speed drivetrain, suspension hardware, braking components, and digital instrumentation. A test ride provides an opportunity to assess the low seat height, chassis geometry, handling, power delivery, and suspension movement from the controls. We can also explain the LED lighting, USB Type-C outlet, Tire Pressure Monitoring System, and cornering-enhanced rider safety technologies. Contact our team to arrange a visit and evaluate the motorcycle’s performance, technology, comfort, handling, and safety equipment.