The 2026 Harley-Davidson® Street Bob® combines a Softail® chassis platform with Milwaukee-Eight® V-twin performance, modern rider assistance systems, and a compact cruiser configuration. The motorcycle uses a stripped-down layout focused on mechanical performance, low seat height, and responsive torque delivery. The specifications reflect a model designed for urban riding, highway travel, and short-distance touring without adding large infotainment systems or touring-oriented bodywork. The 2026 Harley-Davidson® Street Bob® retains a traditional Harley-Davidson® design structure while incorporating updated electronics, LED lighting, and cornering rider safety enhancements.
Milwaukee-Eight® 117 Classic Engine Configuration
The 2026 Harley-Davidson® Street Bob® uses the Milwaukee-Eight® 117 Classic engine. This powertrain has a displacement of 117 cubic inches, equivalent to 1,923 cc. The engine uses a bore measurement of 4.075 inches and a stroke measurement of 4.5 inches. Compression ratio is rated at 10.3:1.
The valve train uses a pushrod-operated overhead valve arrangement with hydraulic self-adjusting lifters and four valves per cylinder. This configuration reduces the need for periodic valve adjustments while supporting improved airflow through the cylinder heads. Fuel delivery comes through Electronic Sequential Port Fuel Injection. This fuel system provides controlled fuel metering under varying throttle positions and engine loads.
Air intake is managed through a 9-inch round air cleaner with a center-bolt cover and washable fiberglass filter media. Exhaust routing uses a 2-into-1 system with the catalyst positioned in the header assembly. Lubrication uses a pressurized dry-sump system equipped with an oil cooler.
Output Characteristics and Performance Data
The Milwaukee-Eight® 117 Classic engine produces 120 ft-lb of torque at 2,500 rpm. Horsepower output is rated at 98 HP, or 73 kW, at 4,600 rpm. The low-rpm torque figure supports strong acceleration from lower engine speeds and reduces the need for aggressive throttle input during passing or highway merging.
Lean angle measurements are listed at 28.5 degrees on both the left and right sides. These figures indicate balanced cornering clearance and consistent chassis geometry during directional transitions. Engine torque testing follows J1349 standards, while lean angle measurements follow J1168 testing methods.
Fuel economy is estimated at 47 mpg, or 5 l/100 km, using estimated city and highway testing methods. The fuel tank capacity is 3.5 gallons, with a reserve fuel capacity of 1 gallon linked to the fuel injection warning light system.
Six-Speed Cruise Drive® Transmission System
The 2026 Harley-Davidson® Street Bob® uses a 6-Speed Cruise Drive® transmission. The transmission pairs with a mechanical 10-plate wet clutch using assist and conventional clutch operation. This clutch arrangement supports controlled engagement under acceleration and downshifting conditions.
Primary drive uses a chain system with a 34/46 ratio. Final drive uses a belt system with a 32/66 ratio. Belt final drive systems reduce maintenance requirements associated with chain lubrication and adjustment.
Overall gear ratios are listed at 9.311 in first gear, 6.454 in second gear, 4.793 in third gear, 3.882 in fourth gear, 3.307 in fifth gear, and 2.79 in sixth gear. The ratio spread supports lower-speed acceleration in lower gears while maintaining reduced engine speed during highway operation in sixth gear.
Softail® Chassis Structure and Dimensions
The frame uses mild steel tubular construction with a rectangular-section backbone. The chassis incorporates stamped, cast, and forged junctions joined through MIG welding. Aluminum forged fender supports are also integrated into the structure.
The swingarm uses mild steel tubular sections combined with a stamped cross-member and forged axle junctions. The assembly also uses MIG-welded construction and includes a removable belt spacer.
Overall motorcycle length is listed at 91.3 inches. Width measures 36.4 inches, while overall height measures 45.7 inches. Wheelbase is rated at 64.2 inches. Steering geometry includes a 30-degree rake angle and a 30-degree fork angle. Trail measurement is listed at 6.2 inches.
Seat height in a laden condition measures 25.8 inches, while unladen seat height measures 26.8 inches. Static ground clearance measures 4.9 inches. These dimensions support a lower riding position and reduced reach to the ground during stops.
Weight as shipped is rated at 622 pounds. Running order weight is listed at 646 pounds. The Gross Vehicle Weight Rating is 1,160 pounds. Front Gross Axle Weight Rating is 450 pounds, and the rear Gross Axle Weight Rating is 730 pounds.
Front and Rear Suspension Components
Front suspension uses a dual-bending valve 49 mm telescopic fork with aluminum fork triple clamps, dual-rate springs, and gaiter covers. Front suspension travel measures 5 inches.
Rear suspension uses a hidden free-piston coil-over monoshock with a 43 mm stroke and cam-style preload adjustment. Rear suspension travel is listed at 3.4 inches. The hidden rear suspension design preserves the rigid-style Softail® appearance while maintaining rear wheel travel and damping control.
The suspension configuration supports stability during highway operation and controlled response during cornering and uneven pavement conditions.
Wheel Design and Tire Specifications
The standard wheel package uses black Annihilator cast aluminum wheels. Front wheel diameter measures 19 inches with a width of 2.5 inches. Rear wheel diameter measures 16 inches with a width of 3 inches.
Optional painted aluminum tubeless laced wheels are also listed for the model. Tire equipment uses Dunlop® Harley-Davidson® Series bias blackwall tires on both front and rear positions.
The front tire specification is 100/90B19 57H BW using the D401F model designation. Rear tire specification is 150/80B16 77H BW using the D401T designation. Tire sizing supports balanced handling response and cruiser-style stance proportions.
Brake System and Rider Assistance Technologies
The braking system uses a 4-piston fixed front caliper and a 2-piston floating rear caliper. Front rotor diameter measures 11.8 inches with a thickness of 0.2 inches. Rear rotor diameter measures 11.5 inches with a thickness of 0.23 inches. Rotor construction uses solid uniform expansion rotors.
Anti-lock Brake System technology is included as standard equipment. The motorcycle also includes Traction Control System functionality and Drag-torque Slip Control System capability. These systems assist with braking stability and rear-wheel traction management during acceleration and downshifting conditions.
The 2026 Harley-Davidson® Street Bob® also incorporates Cornering Enhanced Anti-lock Brake System technology, Cornering Enhanced Traction Control System functionality, and Cornering Drag-Torque Slip Control System capability. These systems account for motorcycle lean angle while managing traction and braking response during cornering maneuvers.
Electrical Equipment and LED Lighting Systems
The electrical system uses a sealed maintenance-free absorbed glass mat battery rated at 12 volts, 17.5 Ah, and 310 cold cranking amps at 0°F. Charging output comes from a three-phase 48-amp system. Output figures include 364 watts at 13 volts and 900 rpm, along with a maximum output of 624 watts at 13 volts and 2,000 rpm.
Engine starting uses a 1.6 kW electric starter with solenoid-shift starter motor engagement.
Lighting equipment uses LED technology throughout the motorcycle. The headlamp assembly includes LED low beam, high beam, and signature position lamp functions. Rear lighting uses bullet-style LED stop, tail, and turn signal assemblies. Front turn signals also use LED bullet-style units.
The lighting package improves visibility and reduces electrical demand compared with conventional incandescent systems.
Rider Display and Instrumentation Layout
Instrumentation centers around a 4-inch analog speedometer integrated with digital display functions. The display provides gear position indication, odometer information, fuel level monitoring, ride mode information, heated gear indication, traction control status, ABS status, Tire Pressure Monitoring System information, cruise control indication, clock display, trip data, range calculation, and tachometer indication.
The 2026 Harley-Davidson® Street Bob® does not use a touchscreen infotainment system, integrated navigation display, Bluetooth® communication system, rider intercom system, or external speaker package. This configuration maintains a simplified cockpit layout focused on core riding information.
A USB-C power outlet is included with a 5V output at 2.4 amps for compatible device charging.
Fuel, Oil, and Service Capacities
Fuel capacity measures 3.5 gallons. Oil capacity with filter measures 5 quarts. Transmission fluid capacity is listed at 1 quart, while primary chain case capacity measures 1.25 quarts. The motorcycle does not use liquid cooling, so no coolant capacity is listed.
The lubrication system uses pressurized dry-sump operation combined with an oil cooler. This arrangement separates oil storage from the crankcase and supports temperature control during extended operation.
Schedule a Test Ride Today
Riders interested in evaluating the 2026 Harley-Davidson® Street Bob® can schedule a test ride with Tower's Frontier Harley-Davidson® in Lincoln, NE. A test ride provides an opportunity to examine the Milwaukee-Eight® 117 Classic engine performance, six-speed transmission operation, and low-seat Softail® chassis configuration under normal riding conditions. Riders can also review the functionality of the ABS, traction control, cornering rider safety systems, LED lighting package, and integrated instrumentation display during operation. The motorcycle’s torque delivery, suspension setup, braking response, and rider ergonomics can be assessed directly through a scheduled ride. Our dealership team can also provide additional technical information regarding specifications, rider assistance systems, wheel configurations, and maintenance-related components during the visit.