The 2026 Harley-Davidson® Sportster® S combines the Revolution® Max 1250T engine with a stressed-member chassis, adjustable suspension, electronic rider aids, and a centralized digital instrument interface. Its technical package includes 121 horsepower, 93 ft-lb of torque, a six-speed transmission, radial tires, and a 59.8-inch wheelbase. The motorcycle also incorporates a color TFT display, Bluetooth®-supported functions, LED lighting, and USB-C connectivity. Standard rider safety equipment addresses braking, traction, drag torque, tire pressure, and wheel lift, including several cornering-enhanced functions. The following sections examine the 2026 Harley-Davidson® Sportster® S powertrain, drivetrain, chassis, braking hardware, physical dimensions, electrical systems, rider interface, and safety technologies.
Revolution® Max 1250T Engine and Drivetrain
The powertrain of the 2026 Harley-Davidson® Sportster® S centers on a liquid-cooled Revolution® Max 1250T engine with electronic fuel injection and variable valve timing. Its internal dimensions, compression ratio, intake equipment, exhaust layout, and lubrication system define the engine’s mechanical configuration. A six-speed transmission transfers engine output through an assist-and-slip wet clutch and belt final drive. Published horsepower and torque figures identify the engine’s rated performance at specific engine speeds. Fuel, oil, and coolant capacities also provide practical information about the motorcycle’s operating requirements.
Engine Construction and Performance
The Revolution® Max 1250T has a displacement of 76.4 cubic inches, or 1,252 cc. It uses a 4.134-inch bore and a 2.846-inch stroke, along with a 12.0:1 compression ratio. The engine produces a certified 121 horsepower, or 90 kW, at 7,500 rpm. Certified torque reaches 93 ft-lb, or 126 Nm, at 6,000 rpm under the specified J1349 testing method. These figures describe an engine designed to deliver substantial output through the upper portion of its operating range.
The valvetrain uses chain-driven dual overhead camshafts and four valves per cylinder. Hydraulic self-adjusting lifters are included, along with variable valve timing for both the intake and exhaust systems. Electronic Sequential Port Fuel Injection controls fuel delivery to the engine. Harley-Davidson® specifies recommended 91-octane or higher fuel using the R+M/2 rating method. A downdraft intake with tuned velocity stacks and washable filter media supplies the induction system.
The exhaust follows a 2-into-1-into-2 layout and places the catalyst within the muffler. A semi-dry-sump lubrication system manages engine oil circulation. Oil capacity with the filter is 4.75 quarts, or 4.5 liters. The cooling system holds 2.32 quarts, or 2.2 liters, of coolant. These systems support the operating demands of the liquid-cooled, high-compression engine without adding unsupported claims about performance characteristics.
Six-Speed Transmission and Belt Drive
The 2026 Harley-Davidson® Sportster® S uses a six-speed transmission with clearly defined overall gear ratios. First gear carries a ratio of 12.21, while second gear is listed at 9.022. Third and fourth gears use ratios of 6.994 and 5.641, respectively. Fifth gear has a ratio of 4.731, and sixth gear uses a ratio of 4.131. This progression provides six distinct mechanical stages for transferring engine output to the rear wheel.
The clutch is a mechanical eight-plate wet unit with assist-and-slip functions. Its listed force specification is 1,090 N. The primary drive uses gears with a 49/89 ratio, while the final drive uses a belt with a 34/80 ratio. The belt system transfers power from the transmission to the rear wheel without a chain final-drive arrangement. The published drivetrain configuration identifies each major component without relying on generalized descriptions.
Fuel Capacity, Economy, and Weight
Fuel capacity is 3.1 gallons, or 11.7 liters. The fuel-injection warning light reserve is listed at 0.8 gallons, or 3 liters. Estimated city and highway fuel economy is 49 mpg, or 4.8 liters per 100 kilometers. The motorcycle weighs 487 pounds as shipped and 502 pounds in running order. The 15-pound difference reflects the change between the two published weight conditions.
The gross vehicle weight rating is 922 pounds, or 418 kilograms. The front gross axle weight rating is 359 pounds, or 163 kilograms. The rear gross axle weight rating is 595 pounds, or 270 kilograms. No luggage-capacity volume is specified for this model. These ratings provide the formal limits associated with the motorcycle’s total operating weight and axle loading.
Chassis, Suspension, Wheels, and Brakes
The chassis of the 2026 Harley-Davidson® Sportster® S combines high-strength steel structures with an aluminum forged mid-structure and adjustable suspension components. Its frame and swingarm use stamped, cast, forged, and tubular elements joined through specified manufacturing methods. Cast aluminum wheels carry wide radial tires designed for this motorcycle’s wheel sizes. Front and rear brakes use different caliper and rotor configurations, with standard anti-lock braking support. Steering geometry, suspension travel, ground clearance, and lean-angle measurements provide additional technical context for the handling package.
Stressed-Member Frame and Swingarm
The frame uses a stressed-member design constructed from high-strength low-alloy steel. It incorporates a trellis layout with stamped, cast, and forged junctions. MIG welding joins the listed steel components. An aluminum-forged mid-structure forms another part of the chassis assembly. This combination of materials and manufacturing methods defines the motorcycle’s primary structural system.
The swingarm also uses high-strength low-alloy steel. Its construction includes tubular sections, a stamped crossmember, and forged axle junctions. MIG welding joins the individual swingarm elements. The use of tubular, stamped, and forged parts allows the assembly to combine several structural forms in one component. The source information identifies the swingarm’s materials and construction without assigning unsupported performance benefits.
Adjustable Front and Rear Suspension
A 43 mm inverted fork manages the front suspension. It includes adjustments for compression damping, rebound damping, and spring preload. Aluminum fork triple clamps position and support the fork assembly. Front suspension travel measures 3.6 inches, or 92 mm. These features give the rider several defined adjustment points for the front end.
The rear suspension uses a linkage-mounted piggyback monoshock. It provides compression and rebound adjustment, along with hydraulic spring-preload adjustment. Rear suspension travel measures 3.2 inches, or 82 mm. The hydraulic preload system offers a dedicated method for changing spring preload. Front and rear adjustability allow suspension settings to be modified within the ranges provided by the motorcycle’s components.
Wheels, Tires, and Geometry
The front wheel is a satin-black cast aluminum unit measuring 17 inches in diameter and 4.5 inches in width. The rear wheel uses the same cast aluminum and satin-black construction. It measures 16 inches in diameter and 5 inches in width. Wheel availability can vary by country and region. No optional wheel style is specified.
Dunlop® Harley-Davidson® Series GT503 radial tires are fitted at both ends. The front tire specification is 160/70R17 73V. The rear tire specification is 180/70R16 77V. These dimensions correspond to the listed front and rear wheel sizes. The tire package forms part of the motorcycle’s published chassis equipment.
The steering-head rake measures 30 degrees, while the fork angle measures 28 degrees. Trail is 5.8 inches, or 148 mm, and the wheelbase is 59.8 inches, or 1,520 mm. Static ground clearance measures 3.5 inches, or 90 mm. The tested lean angle is 35 degrees on both the left and right sides. These measurements define the motorcycle’s steering geometry, wheel placement, and available clearance.
Front and Rear Braking Hardware
The front brake uses a radially mounted monoblock four-piston caliper. It operates on a single floating, tower-mounted rotor. The front rotor diameter is 12.6 inches, or 320 mm, and thickness is 0.2 inch, or 5 mm. The front system does not use dual rotors. Standard ABS supports the braking system.
The rear brake uses a floating single-piston caliper. Its solid uniform-expansion rotor measures 10.2 inches, or 260 mm, in diameter. The rear rotor thickness is 0.2 inch, or 5 mm. The front and rear assemblies use different caliper and rotor designs suited to their respective positions. Cornering Enhanced ABS adds another braking-related function within the motorcycle’s rider safety equipment.
Dimensions, Rider Interface, and Electrical Systems
The physical measurements of the 2026 Harley-Davidson® Sportster® S define its overall footprint, seat height, clearance, and wheel placement. Its electrical equipment supports engine starting, battery charging, lighting, instrumentation, phone pairing, and device charging. A four-inch color TFT display consolidates riding data, warnings, and vehicle information. Bluetooth® functions provide access to calls, music, and supported navigation through a compatible phone and application. The combination of dimensions and electronic equipment contributes to the motorcycle’s practical rider interface.
Overall Measurements and Seat Height
Overall length is 89.4 inches, or 2,270 mm. The width measures 33.1 inches, or 840 mm, and the height is 42.7 inches, or 1,085 mm. The laden seat height is 28.9 inches, or 734 mm, based on a 180-pound operator. Unladen seat height measures 30.1 inches, or 765 mm. These values allow riders to evaluate the motorcycle’s physical size and seating height before an in-person assessment.
Battery, Charging, and Starting
The motorcycle uses a sealed, maintenance-free absorbed glass mat battery. The 12-volt unit has a 12 Ah rating and supplies 225 cold-cranking amps at 0 degrees Fahrenheit. Starting power comes from a 0.9 kW electric motor. The starter uses direct-drive engagement. This equipment forms the motorcycle’s complete listed starting system.
A three-phase 45-amp charging system maintains electrical supply. It produces 300 watts at 13 volts and 1,200 rpm. Maximum output is listed at 585 watts at 13 volts and 2,250 rpm. These output figures describe the charging system at two defined engine speeds. The motorcycle does not include a conventional electric power outlet.
LED Lighting Equipment
The headlamp uses LEDs for both low and high beams. Signature position lighting is incorporated into the front lighting assembly. The rear tail and stop lights also use LED technology. Front and rear turn indicators are LED bullet signals. Auxiliary lamps are not specified for the 2026 Harley-Davidson® Sportster® S.
The all-LED lighting equipment covers the main headlamp, rear lighting, and direction indicators. Each listed exterior lighting component uses the same basic light-source technology. The headlamp combines functional beam output with its position-lighting element. The rear assembly provides both tail and stop-light functions. The turn signals maintain the bullet-style housing described in the equipment specifications.
TFT Instrument Display
A four-inch, or 102 mm, color TFT display serves as the primary gauge interface. It presents the speedometer, selected gear, odometer, fuel level, clock, trip information, range, and tachometer reading. The screen also displays ambient temperature and provides a low-temperature alert. Additional alerts cover the side stand and tip-over status. Cruise indication is included among the available display functions.
The vehicle information screen presents tire-pressure data, engine temperature, battery voltage, and ambient air temperature. This information gives the rider access to several operating conditions from the instrument panel. Tire-pressure data works with the included Tire Pressure Monitoring System. The screen consolidates riding information, warning indications, and vehicle-status data. It does not require a separate analog gauge package for the listed functions.
Bluetooth® and USB-C Functions
Bluetooth® capability supports phone and media functions. Hands-free mobile-phone operation through Bluetooth® is standard. Phone pairing can provide access to calls, music, and navigation through the Harley-Davidson® application. Text-to-speech language support depends on the connected phone. Rider and passenger intercom operation is limited to headset function.
The motorcycle does not include an integrated speaker system, AM radio, FM radio, weather band radio, or other listed broadcast radio equipment. Bluetooth® navigation depends on a compatible connected device. USB-C supports charging and instrument updates at 5 volts and 3 amps. Another listed USB Type-C output provides 5 volts at 2.4 amps in connection with the GPS-related equipment entry. These systems keep communication, media, navigation, and charging functions focused on the TFT display, Bluetooth® pairing, compatible headset, and connected phone.
Rider Safety and Control Technologies
The 2026 Harley-Davidson® Sportster® S includes electronic systems that address anti-lock braking, traction management, drag-torque control, tire-pressure monitoring, and wheel-lift mitigation. Several functions also have cornering enhanced versions. The equipment list clearly identifies which technologies are included and which are unavailable. These systems supplement the motorcycle’s mechanical brakes, tires, suspension, and chassis. They do not replace proper rider input, judgment, or control.
Anti-Lock Braking and Cornering Support
Standard ABS is included with the 2026 Harley-Davidson® Sportster® S braking system. Cornering Enhanced ABS is also included. The cornering-enhanced function adds a distinct system to the standard anti-lock braking package.
The lack of linked braking means the front and rear controls remain associated with their respective braking hardware rather than a listed electronic linking function. The front brake uses its four-piston caliper and 320 mm rotor. The rear brake uses its single-piston caliper and 260 mm rotor. ABS provides electronic support for both braking assemblies. Cornering Enhanced ABS extends the listed safety package to braking situations involving lean.
Traction and Drag-Torque Management
The Traction Control System is included as standard equipment. Cornering Enhanced Traction Control is also included. These systems appear as separate entries within the rider safety specifications. Their inclusion confirms both standard and cornering-related traction functions. No unsupported operating descriptions are necessary to establish their presence.
The Drag-Torque Slip Control System is also standard. A Cornering Drag-Torque Slip Control System adds a corresponding cornering-enhanced function. Together, these systems address the motorcycle’s listed drag-torque control capability. Their operation is integrated with the broader electronic safety package. The specifications do not identify rider-selectable adjustment ranges for these functions.
Tire Pressure and Wheel-Lift Mitigation
The Tire Pressure Monitoring System is included. Tire-pressure information is available through the TFT vehicle information screen. This arrangement allows the monitoring system and display to function as related parts of the rider interface. The specifications do not list a separate analog tire-pressure indicator. The system joins ABS, traction control, and drag-torque control within the standard safety equipment.
Wheel Lift Mitigation is also included. Enhanced Lift Mitigation appears within the cornering rider safety enhancements. The safety package therefore emphasizes braking control, traction management, drag-torque management, tire-pressure monitoring, and lift mitigation. Each included system complements the motorcycle’s mechanical chassis and braking components.
Schedule a Test Ride at Tower's Frontier Harley-Davidson®
A test ride provides a direct opportunity to evaluate the 2026 Harley-Davidson® Sportster® S and its functional equipment. Visit Tower's Frontier Harley-Davidson® near Omaha, NE, to review the Revolution® Max 1250T engine, adjustable suspension, braking hardware, and rider safety systems with our team. We can also explain the TFT display, Bluetooth® functions, USB-C connectivity, seating dimensions, and control layout before the ride. On the road, riders can assess the motorcycle’s performance delivery, handling geometry, suspension response, seating position, and digital interface. Schedule a test ride to examine how its powertrain, technology, comfort-related measurements, and electronic safety features operate as an integrated package.