2026 Harley-Davidson® Road Glide® near Omaha, NE

Teal 2026 Harley-Davidson Road Glide parked at mountain overlook near Omaha NE

The 2026 Harley-Davidson® Road Glide® combines a Milwaukee-Eight® 117 engine with a 6-Speed Cruise Drive® transmission and an extensive range of electronic rider systems. Its equipment includes rear suspension with preload adjustment, cast aluminum wheels, dual front brake rotors, and standard anti-lock braking. A 12.3-inch full-color display integrates digital instrumentation with Skyline™ OS infotainment, embedded navigation, and smartphone connectivity. Fairing-mounted speakers, a USB-C accessory power port, and 2.42 cubic feet of luggage capacity add audio, device charging, and storage functions. The model’s technical configuration spans engine performance, drivetrain operation, chassis construction, braking systems, rider dimensions, and connected technology.

Milwaukee-Eight® 117 Engine and Drivetrain

The 2026 Harley-Davidson® Road Glide® uses a Milwaukee-Eight® 117 engine with a displacement of 117 cubic inches, or 1,923 cc. The engine produces a nominal 130 lb-ft of torque at 3,250 rpm. Its rated power measures 105 horsepower, or 78 kW, at 4,600 rpm. Harley-Davidson® specifies the torque figure using the J1349 testing method. A 4.075-inch bore, 4.5-inch stroke, and 10.3:1 compression ratio complete the principal engine dimensions and compression specification.

Valve Operation and Fuel Delivery

The Milwaukee-Eight® 117 uses pushrod-operated overhead valves and four valves per cylinder. Hydraulic, self-adjusting lifters form part of the valve operating system. Electronic Sequential Port Fuel Injection supplies fuel to the engine. A washable fiberglass air cleaner and a 2-1-2 dual exhaust with tapered mufflers accompany the fuel system. The recommended fuel grade is 91 octane or higher under the R+M/2 measurement method.

A pressurized dry-sump system supplies engine lubrication. Engine oil capacity measures 5 quarts with the filter included. The transmission carries a separate fluid capacity of 1 quart. The primary chain case holds 1.1 quarts, while coolant capacity measures 0.82 quarts. These quantities identify the individual fluid requirements for the engine, transmission, primary chain case, and coolant system.

Six-Speed Transmission and Drive Components

The 2026 Harley-Davidson® Road Glide® pairs its engine with a 6-Speed Cruise Drive® transmission. A mechanically actuated, 10-plate wet clutch incorporates Assist and Slip functionality. The chain primary drive uses a 34/46 ratio, and the belt final drive uses a 32/68 ratio. Overall gear ratios measure 9.593 in first, 6.65 in second, and 4.938 in third. The remaining overall ratios measure 4 in fourth, 3.407 in fifth, and 2.875 in sixth.

The fuel tank holds 6 gallons, equivalent to 22.7 liters. The fuel-injection warning-light reserve quantity measures 1 gallon, or 3.8 liters. Estimated city and highway fuel economy measures 44 mpg. The equivalent consumption figure is 5.3 liters per 100 kilometers. Tank capacity, the reserve warning quantity, and estimated fuel consumption provide separate measures of fuel storage and use.

Chassis Construction and Suspension

The 2026 Harley-Davidson® Road Glide® uses a mild-steel tubular frame with a two-piece stamped and welded backbone. Its construction incorporates cast and forged junctions, twin down-tubes, and MIG-welded connections. A bolt-on rear frame includes forged fender supports. The mild-steel swingarm uses a two-piece drawn and welded section with forged junctions. MIG welding also forms part of the swingarm’s construction, completing the structural specifications for these chassis components.

Front Fork and Adjustable Rear Shocks

A 49 mm Dual Bending Valve front fork provides 4.6 inches of suspension travel. The rear suspension uses dual outboard emulsion shocks. These shocks include preload adjustability as part of their equipment configuration. Rear suspension travel measures 3 inches, or approximately 76 mm. The front fork and rear shocks therefore have separate construction specifications and travel measurements, with preload adjustment provided at the rear.

The steering-head rake measures 26 degrees. The fork angle measures 29.25 degrees, and the trail measures 6.8 inches. A 64-inch wheelbase defines the distance between the front and rear wheel centers. Static ground clearance measures 5.7 inches. Harley-Davidson® specifies a 32-degree lean angle on each side using the SAE J1168 testing method.

Cast Aluminum Wheels and Tires

The 2026 Harley-Davidson® Road Glide® uses cast aluminum wheels at both ends. The front wheel measures 19 inches in diameter and 3.5 inches in width. The rear wheel measures 18 inches in diameter and 5 inches in width. Both wheels carry Dunlop® Harley-Davidson® Series bias blackwall tires. The front tire is a D408F with a 130/60B19 M/C 61H specification, and the rear is a D407T with a 180/55B18 M/C 80H specification.

Braking Equipment and Rider Safety Systems

The 2026 Harley-Davidson® Road Glide® combines dual front brake assemblies with a single rear brake assembly and several electronic rider safety systems. 

Standard equipment includes an Anti-lock Brake System, Electronic Linked Braking, and Traction Control System. The Drag-torque Slip Control System also forms part of the included equipment. Vehicle Hold Control and the Tire Pressure Monitoring System add further rider functions. The motorcycle includes cornering-enhanced versions of its braking, traction control, and drag-torque slip control systems.

Brake Rotors and Calipers

The front braking system uses two floating rotors. Each front rotor measures 12.6 inches in diameter and 0.18 inches in thickness. The rear brake uses a fixed rotor measuring 11.8 inches in diameter and 0.28 inches in thickness. The caliper specification lists 32 mm, four-piston fixed units with dual axially mounted front calipers and a single axially mounted rear caliper. Standard anti-lock braking accompanies this front and rear hardware configuration.

Cornering Enhancements and Monitoring Equipment

The included cornering equipment begins with the Cornering Enhanced Anti-lock Brake System and the Cornering Enhanced Electronic Linked Braking. The Cornering Enhanced Traction Control System adds another element to the electronic equipment package. The motorcycle also includes Cornering Drag-Torque Slip Control System. These systems accompany the standard ABS, Electronic Linked Braking, Traction Control System, and Drag-torque Slip Control System. Vehicle Hold Control and the Tire Pressure Monitoring System complete the listed rider safety functions without adding separate mechanical brake components.

Rider Dimensions Utility and Connected Technology

The 2026 Harley-Davidson® Road Glide® measures 94.9 inches long, 37.2 inches wide, and 51.8 inches high. The laden seat height measures 26.6 inches with a 180-pound operator. Unladen seat height measures 28.3 inches. The motorcycle weighs 802 pounds as shipped and 838 pounds in running order. The seat and weight figures identify different measurement conditions, while the overall dimensions describe the motorcycle’s physical size.

Luggage Capacity and Weight Ratings

The 2026 Harley-Davidson® Road Glide® provides 2.42 cubic feet of luggage capacity. Gross vehicle weight rating measures 1,360 pounds. The front gross axle weight rating measures 500 pounds. The rear gross axle weight rating measures 927 pounds. Luggage volume and vehicle weight ratings express different aspects of carrying capacity, with storage measured by volume and vehicle loading specified by weight.

Electrical System and LED Lighting

A sealed, maintenance-free 12-volt battery provides a 28-amp-hour capacity. Its cold-cranking-amp rating measures 405 under Battery Council International criteria. The three-phase charging system carries a 58-amp rating and supplies a maximum of 754 watts at 13 volts. A 1.6 kW electric starter uses solenoid-shift engagement. LED lighting equips the headlamp, tail and stop lamps, front signals, and rear turn signals, while a 15-watt USB-C accessory power port sits in the media storage box.

Skyline™ OS Display and Navigation

Skyline™ OS operates through a 12.3-inch full-color TFT screen. Digital gauges integrate within the display alongside the infotainment interface. A standard vehicle information screen provides air temperature, oil pressure, and EITMS information. The motorcycle includes an embedded navigation system. Traffic and weather information use a Wi-Fi hotspot connection, and access requires a subscription in the United States.

The audio system includes two 5.25-inch fairing speakers. Rated output measures 50 watts per channel. Standard AM and FM radio provide broadcast audio functions. The system also supports SD cards, flash drives, and MP3 media through a USB connection. Bluetooth® connectivity accommodates a phone, media player, and headset, and hands-free mobile phone operation comes standard.

Apple CarPlay® supports wireless or wired connectivity. The USB interface accommodates USB-C, MTP, and smartphone connections with the proper adapters at the connection inside the inner fairing storage area. These provisions identify the available phone and media connection methods. Rider and passenger headsets sell separately. VOX intercom functionality is available for H-D headsets, distinguishing the supported intercom feature from the separately purchased headset equipment.

Schedule a Test Ride Today

Schedule a test ride of the 2026 Harley-Davidson® Road Glide® with our team at Tower's Frontier Harley-Davidson® near Omaha, NE. We can review the Milwaukee-Eight® 117 engine, six-speed transmission, and suspension configuration before your ride. During the ride, assess engine performance, handling, seating position, and comfort. Our team can also walk you through the Skyline™ OS display, navigation, and smartphone connectivity. We can explain the included braking, traction control, tire pressure monitoring, and cornering safety features so you can review the motorcycle’s equipment alongside your riding experience.