2026 Harley-Davidson® Low Rider® ST in Lincoln, NE

Rider on a 2026 Harley-Davidson Low Rider ST in white cruising through an urban street, available in Lincoln NE

The 2026 Harley-Davidson® Low Rider® ST is engineered as a performance-focused motorcycle that integrates high-output engine capability, a structurally reinforced chassis, and a targeted set of rider-assist systems. This model combines a large-displacement V-twin engine with a balanced geometry profile, dual front braking hardware, and a suspension system designed for controlled response. The specifications show a deliberate emphasis on mechanical efficiency, predictable handling, and functional touring capacity. 

High-Output Engine Architecture and Internal Specifications

The 2026 Harley-Davidson® Low Rider® ST is equipped with the Milwaukee-Eight® 117 High Output engine. This power unit has a displacement of 117 cubic inches, equivalent to 1,923 cubic centimeters. The engine uses a bore of 4.075 inches and a stroke of 4.5 inches, paired with a compression ratio of 10.3:1. These dimensions establish a large combustion chamber volume that supports strong torque production at moderate engine speeds.

The valvetrain uses a pushrod-operated overhead valve configuration with hydraulic self-adjusting lifters. Each cylinder contains four valves, improving airflow efficiency and combustion stability. The fuel system is Electronic Sequential Port Fuel Injection, which meters fuel delivery with precision based on throttle input and operating conditions. The air intake system uses a Heavy Breather design with a washable exposed element, allowing consistent airflow and simplified maintenance.

The exhaust system uses a 2-into-1 configuration with a catalyst integrated into the header. This layout contributes to efficient exhaust flow while meeting emissions requirements. The lubrication system is pressurized and dry-sump, incorporating an oil cooler to regulate operating temperature during sustained use. 

Measured Performance Output and Power Delivery

The Milwaukee-Eight® 117 High Output engine produces 128 foot-pounds of torque at 4,000 revolutions per minute. Peak power output is rated at 114 horsepower at 5,000 revolutions per minute. These figures indicate a torque curve that is concentrated in the mid-range, supporting acceleration without requiring high engine speeds.

The drivetrain includes a 6-Speed Cruise Drive® transmission. Gear ratios range from 9.311 in first gear to 2.79 in sixth gear, creating a progression that supports both initial acceleration and lower engine speed during highway operation. The primary drive uses a chain system with a 34/46 ratio, while the final drive uses a belt with a 32/66 ratio. This combination provides mechanical strength at the primary stage and reduced maintenance requirements at the final drive.

The clutch system is a mechanical, 10-plate wet clutch with assist and conventional operation. This design improves engagement consistency and reduces lever effort during operation. The integration of these drivetrain components ensures efficient transfer of engine output to the rear wheel.

Frame Construction and Structural Geometry

The frame of the 2026 Harley-Davidson® Low Rider® ST is constructed from mild steel with a tubular structure and a rectangular-section backbone. The frame incorporates stamped, cast, and forged junctions that are MIG-welded. Aluminum forged fender supports are included to reduce weight in non-critical structural areas.

The swingarm is also constructed from mild steel with tubular sections and a stamped cross-member. Forged axle junctions and a removable belt spacer are integrated into the design. This structure supports drivetrain alignment and rear suspension stability.

The motorcycle has an overall length of 92.9 inches, a width of 35 inches, and a height of 50.8 inches. The wheelbase measures 63.6 inches. Steering geometry includes a rake angle of 28 degrees and a trail measurement of 5.7 inches. These values contribute to directional stability and predictable steering input.

The laden seat height is 27 inches, while the unladen seat height is 28.1 inches. Static ground clearance is measured at 5.7 inches. Lean angle capability is recorded at 31.3 degrees on both the left and right sides. These measurements indicate a configuration that balances accessibility with cornering clearance.

Suspension Configuration and Travel Characteristics

The front suspension uses a 43 millimeter inverted fork with a single-cartridge design. The fork includes aluminum triple clamps and a single-rate spring. Inverted fork construction increases rigidity in the front assembly, which supports consistent steering response under braking and cornering forces.

The rear suspension uses a hidden coil-over monoshock with a free piston design. The shock provides 56 millimeters of stroke and includes hydraulic preload adjustment. This adjustability allows the rider to compensate for changes in load, such as additional luggage.

Suspension travel measures 5 inches at the front and 4.4 inches at the rear. These values support controlled movement over uneven surfaces while maintaining chassis stability. The combination of front and rear suspension components provides a consistent balance between comfort and handling precision.

Wheel and Tire Specifications

The 2026 Harley-Davidson® Low Rider® ST is equipped with Michelin® Scorcher 31 tires at both the front and rear. The front tire specification is 110/90B19, while the rear tire measures 180/70B16. These dimensions provide a wide rear contact patch for traction and a narrower front profile for steering control.

The front wheel has a diameter of 19 inches and a width of 2.5 inches. The rear wheel measures 16 inches in diameter and 5 inches in width. Wheels are constructed from radiate cast aluminum, with chrome finishes standard and black finishes available as an option.

Braking Hardware and Control Systems

The braking system includes dual front rotors with a diameter of 11.8 inches and a thickness of 0.2 inches. The front calipers are four-piston fixed units. The rear brake uses a single rotor with a diameter of 11.5 inches and a thickness of 0.23 inches, paired with a two-piston floating caliper.

The rotors use a black Split 7-spoke floating design, which supports heat dissipation and braking consistency. Anti-lock Braking System functionality is included as standard equipment. This system prevents wheel lock during braking by modulating brake pressure based on wheel speed data.

Electrical System and Instrumentation

The electrical system includes a sealed, maintenance-free absorbed glass mat battery rated at 12 volts, 17.5 amp-hours, and 310 cold cranking amps at zero degrees Fahrenheit. Charging is managed by a three-phase 48 amp system that produces 364 watts at 13 volts and 900 revolutions per minute, with a maximum output of 624 watts at 2,000 revolutions per minute.

The starting system uses a 1.6-kilowatt electric starter with solenoid shift engagement. This configuration ensures consistent engine start performance under different conditions.

Instrumentation consists of a 4-inch analog speedometer combined with a digital display. The digital interface provides gear position, odometer, fuel level, ride modes, heated gear status, traction control status, ABS status, tire pressure monitoring, cruise control, clock, trip data, range, and tachometer indication. This layout presents operational data without requiring a large display system.

A USB-C power outlet is included, providing 5 volts at 2.4 amps for device charging. This addition supports the use of external accessories or personal devices during operation.

Lighting Configuration and Visibility Systems

The lighting system uses LED technology for all major functions. The headlamp includes a low beam, a high beam, and a signature position lamp. The tail and stop lamp use an LED Buffet-style design. Front and rear turn signals are LED Bullet Turn Signals.

LED lighting improves visibility and reduces maintenance requirements compared to traditional bulb systems. The consistent output and durability of LED components support reliable operation in different lighting conditions.

Fuel Capacity and Operating Range Parameters

The fuel tank has a capacity of 5 gallons, with a reserve fuel warning activated at approximately 1 gallon remaining. Estimated fuel economy is rated at 47 miles per gallon. This combination allows extended operation between refueling intervals.

Oil capacity is 5 quarts with a filter, while the transmission holds 1 quart and the primary chain case holds 1.25 quarts. These capacities support consistent lubrication across the engine and drivetrain systems.

The motorcycle has a weight of 686 pounds as shipped and 712 pounds in running order. The gross vehicle weight rating is 1,160 pounds, with front and rear axle ratings of 450 pounds and 730 pounds, respectively. These figures define load limits and operational capacity.

Rider Safety and Control Enhancements

The 2026 Harley-Davidson® Low Rider® ST includes multiple rider-assist systems designed to manage traction and braking. Anti-lock Braking System is standard. The Traction Control System regulates rear wheel spin by adjusting power delivery. The Drag-torque Slip Control System reduces rear wheel instability during aggressive downshifting.

The Tire Pressure Monitoring System provides continuous feedback on tire pressure levels, allowing the rider to maintain optimal tire performance. Cornering Enhanced ABS adjusts braking pressure based on lean angle input. Cornering Enhanced Traction Control and Cornering Drag-torque Slip Control provide similar adjustments during cornering conditions.

Schedule a Test Ride Today

We invite you to examine the 2026 Harley-Davidson® Low Rider® ST in person at Tower's Frontier Harley-Davidson® in Lincoln, NE. Our team can walk you through the engine specifications, suspension configuration, and braking components in detail. A test ride allows you to assess the 117 High Output engine, the 6-speed transmission, and the integrated safety systems under operating conditions. You can also review the instrumentation layout and evaluate how the chassis geometry responds during acceleration and braking. Contact our dealership to schedule your test ride and analyze the technical performance of this model directly.