The 2026 Harley-Davidson® Low Rider® S pairs a Milwaukee-Eight® 117 High Output engine with inverted front suspension, a hidden rear monoshock, and dual front disc brakes. The engine produces 114 horsepower at 5,000 rpm and 128 ft-lb of torque at 4,000 rpm. A 6-Speed Cruise Drive® transmission, mechanical wet clutch, and belt final drive complete the powertrain. The motorcycle includes cornering enhanced braking and traction systems, tire pressure monitoring, and an analog speedometer with digital indications. Its technical configuration combines engine output, adjustable rear suspension preload, electronic rider safety equipment, and a 27-inch laden seat height.
Milwaukee-Eight® 117 High Output engine and drivetrain
The Milwaukee-Eight® 117 High Output engine displaces 117 cubic inches, equivalent to 1,923 cc. Its cylinder bore measures 4.075 inches, and its stroke measures 4.5 inches. The engine operates with a 10.3:1 compression ratio and Electronic Sequential Port Fuel Injection. Pushrod-operated overhead valves work with hydraulic, self-adjusting lifters, and each cylinder contains four valves. These components establish the engine’s mechanical configuration, while the horsepower and torque ratings identify its output at specified engine speeds.
Engine output, intake, and lubrication
The 2026 Harley-Davidson® Low Rider® S produces a nominal 114 horsepower, or 85 kW, at 5,000 rpm. Nominal torque reaches 128 ft-lb, equivalent to 174 Nm, at 4,000 rpm under the J1349 testing method. The Heavy Breather intake incorporates synthetic filter media and a washable exposed element. A 2-into-1 exhaust system places the catalyst in the header. The engine uses pressurized dry-sump lubrication with an oil cooler and holds 5 quarts of oil with the filter.
The fuel tank holds 5 gallons, equivalent to 18.9 liters. The fuel-injection warning-light reserve quantity measures 1 gallon, or 3.8 liters. Estimated city and highway fuel economy is 47 mpg, equivalent to 5 liters per 100 kilometers. The recommended fuel rating is 91 octane or higher using the R+M/2 measurement. Tank capacity, reserve quantity, estimated fuel consumption, and recommended octane provide distinct information for fuel planning and operation.
Six-speed transmission and drive components
The 6-Speed Cruise Drive® transmission provides six forward gears with specified overall ratios. First gear has an overall ratio of 9.311, followed by 6.454 in second and 4.793 in third. Fourth gear uses a ratio of 3.882, while fifth and sixth use ratios of 3.307 and 2.79, respectively. The primary drive uses a chain with a 34/46 ratio, and the final drive uses a belt with a 32/66 ratio. A mechanical 10-plate wet clutch with an assist design connects the engine and transmission.
The transmission and primary chain case have separate lubricant capacities. Transmission capacity measures 1 quart, equivalent to 0.95 liters. The primary chain case holds 1.25 quarts, or 1.18 liters. These quantities remain separate from the engine’s 5-quart oil capacity with the filter. Keeping the capacities distinct provides clear technical information for the engine, transmission, and primary drive assemblies.
Chassis geometry, suspension, and rider dimensions
The 2026 Harley-Davidson® Low Rider® S uses a mild-steel tubular frame with a rectangular-section backbone. Stamped, cast, and forged junctions form part of the frame construction, which uses MIG welding. The chassis also incorporates aluminum forged fender supports. The swingarm combines mild-steel tubular sections with a stamped crossmember and forged axle junctions. Its construction includes MIG-welded joints and a removable belt spacer, completing the structural arrangement around the rear wheel and final drive.
Front and rear suspension
The front suspension uses a single-cartridge 43 mm inverted fork. Aluminum fork triple clamps and a single-rate spring form part of the assembly. Front suspension travel measures 5 inches, or 130 mm. The rear suspension uses a hidden free-piston coil-over monoshock with a 56 mm shock stroke. Rear wheel travel measures 4.4 inches, or 112 mm, and the monoshock includes hydraulic preload adjustment.
The steering-head rake and fork angle both measure 28 degrees. The trail measures 5.7 inches, equivalent to 145 mm. The motorcycle has a 63.6-inch wheelbase, or 1,615 mm. Static ground clearance measures 5.7 inches, describing a separate chassis dimension from the identically sized trail measurement. Lean angles measure 31.3 degrees to the right and left under the J1168 testing method.
Seat height, overall dimensions, and weight ratings
The 2026 Harley-Davidson® Low Rider® S measures 92.9 inches long. Overall width measures 35 inches, and overall height measures 47.4 inches. Laden seat height measures 27 inches, equivalent to 686 mm, with a 180-pound operator. Unladen seat height measures 28.1 inches, or 715 mm. The laden and unladen figures distinguish seat height under different loading conditions and provide useful reference points when assessing seating fit.
As-shipped weight measures 644 pounds, equivalent to 292 kg. Weight in running order measures 670 pounds, or 304 kg. The motorcycle carries a gross vehicle weight rating of 1,160 pounds, equivalent to 526 kg. Its front gross axle weight rating measures 450 pounds, and its rear gross axle weight rating measures 730 pounds. These ratings describe overall vehicle and individual axle limits separately from the motorcycle’s as-shipped and running-order weights.
Wheels, braking hardware, and rider safety systems
Black Radiate cast-aluminum wheels equip the front and rear of the 2026 Harley-Davidson® Low Rider® S. The front wheel measures 19 inches in diameter and 2.5 inches in width. The rear wheel measures 16 inches in diameter and 5 inches in width. Both wheels use Michelin® Scorcher 31 tires. The front tire specification is 110/90B19 62H BW, while the rear specification is 180/70B16 77H BW, identifying the tire configuration at each end of the motorcycle.
Disc brakes and caliper configuration
The front braking system uses dual discs and 4-piston fixed calipers. Each front rotor measures 11.8 inches, equivalent to 300 mm, in diameter. The front rotor thickness measures 0.2 inch, or 5 mm. The rear brake combines a 2-piston floating caliper with an 11.5-inch, or 292 mm, rotor. The rear rotor measures 0.23 inches, or 5.8 mm, in thickness, and both front and rear brakes use black Split 7-spoke floating rotors.
Electronic rider safety equipment
An Anti-lock Brake System comes standard on the 2026 Harley-Davidson® Low Rider® S. The motorcycle also includes a Traction Control System and a Drag-torque Slip Control System. Its cornering equipment includes a Cornering Enhanced Anti-lock Brake System. Cornering Enhanced Traction Control and Cornering Drag-Torque Slip Control systems also form part of the included equipment. A Tire Pressure Monitoring System adds pressure monitoring to the motorcycle’s braking and traction-related safety configuration.
Instruments, LED lighting, and electrical equipment
A 4-inch, or 102 mm, analog speedometer incorporates digital indications for several vehicle functions. The gauge displays gear, odometer, fuel-level, and tachometer information alongside the analog speed indication. Clock, trip, and range indications provide additional operating information. The instrument also includes indications for ride modes, heated gear, traction control, ABS, tire pressure monitoring, and cruise control. These gauge functions bring speed, fuel, distance, and system information into the motorcycle’s instrument assembly.
LED lighting and USB power
The headlamp uses LEDs for the low beam, high beam, and signature position lamp. An LED Buffett tail lamp provides tail and stop lighting. LED Bullet Turn Signals equip the front of the motorcycle. Matching LED Bullet Turn Signals provide the rear turn indications. The electrical equipment also includes a USB C-Type power outlet with an output rating of 5 volts at 2.4 amps.
Battery, charging system, and starter
The motorcycle uses a sealed, maintenance-free, absorbed glass mat battery. Its ratings include 12 volts, 17.5 Ah, and 310 cold-cranking amps at 0°F. A three-phase, 48-amp charging system supplies electrical output. The system produces 364 watts at 13 volts and 900 rpm, with a maximum output of 624 watts at 13 volts and 2,000 rpm. A 1.6 kW electric starter with solenoid-shift motor engagement completes the starting equipment.
Schedule a Test Ride at Tower's Frontier Harley-Davidson®
Schedule a test ride with our team at Tower's Frontier Harley-Davidson® near Omaha, NE, to assess the 2026 Harley-Davidson® Low Rider® S. We can review the Milwaukee-Eight® 117 High Output engine and six-speed transmission before you experience their performance. Our team can also explain the suspension configuration, instrument technology, and included rider safety features. During your visit, assess the seating comfort, handling, and control layout to become familiar with the motorcycle’s functional attributes. Contact us to arrange your test ride and review the equipment in person.