The 2026 Harley-Davidson® CVO™ Street Glide® Limited is powered by the Milwaukee-Eight® VVT 121 engine with a displacement of 121 cubic inches or 1,977 cubic centimeters. The bore measures 4.075 inches, and the stroke measures 4.625 inches. The compression ratio is rated at 11.4 to 1. This engine uses pushrod-operated overhead valves with hydraulic, self-adjusting lifters and four valves per cylinder, ensuring consistent valve operation and reduced maintenance requirements.
The engine produces 139 foot-pounds of torque at 3,000 rpm, tested using the J1349 standard. Maximum output reaches 115 horsepower, or 86 kilowatts, at 4,500 rpm. This torque curve supports strong acceleration in lower and mid-range engine speeds, which is essential for highway merging, two-up riding, and sustained touring operation.
Fuel delivery is managed by Electronic Sequential Port Fuel Injection. The system ensures controlled fuel metering and optimized combustion. The air intake system includes a fiberglass, washable air cleaner designed for durability and serviceability. The exhaust configuration consists of a 2-1-2 dual exhaust system with tapered mufflers, engineered to manage exhaust flow efficiently.
Lubrication is handled by a pressurized dry-sump system. Oil capacity with filter is 5 quarts, while coolant capacity is 0.82 quarts. The motorcycle requires a recommended 91 octane or higher fuel. Fuel capacity is 6 gallons, with a 1-gallon reserve fuel warning system integrated into the fuel injection system. Estimated fuel economy is 45 miles per gallon under city and highway testing standards.
Transmission and Drivetrain Calibration
The 2026 Harley-Davidson® CVO™ Street Glide® Limited utilizes a 6-Speed Cruise Drive® transmission. Gear ratios are precisely configured to support acceleration and highway cruising efficiency. First gear carries an overall ratio of 9.593. Second gear is 6.65. Third gear is 4.938. Fourth gear is 4.0. Fifth gear is 3.407. Sixth gear is 2.875. These ratios provide a broad operating range that balances torque multiplication with reduced engine speed at highway velocities.
Primary drive operation uses a chain system with a 34 over 46 ratio. The final drive uses a belt system with a 32 over 68 ratio. The clutch is a mechanically actuated 10-plate wet design incorporating assist and slip functionality. This configuration reduces clutch lever effort while managing rear wheel torque during aggressive downshifts. Transmission capacity is 1 quart, and the primary chain case capacity is 1.1 quarts.
Frame Construction and Structural Design
The frame is constructed from mild steel using a tubular structure with a two-piece stamped and welded backbone. Cast and forged junctions reinforce structural stress points. The chassis incorporates twin down-tubes and a bolt-on rear frame section supported by forged fender mounts. All major structural components are MIG welded to ensure consistent assembly strength.
The swingarm is also manufactured from mild steel with a two-piece drawn and welded section. Forged junctions reinforce pivot and load-bearing areas. This structural layout provides rigidity under load and maintains predictable handling characteristics during extended touring.
Overall length measures 103.3 inches. Overall width measures 40.7 inches. Overall height measures 56.7 inches. The wheelbase is 64 inches. Rake is set at 26 degrees, with a fork angle of 29.25 degrees. The trail measures 6.7 inches. Static ground clearance is 5.5 inches. These dimensions contribute to straight-line stability and controlled cornering performance.
Weight as shipped is 882 pounds. Weight in running order is 919 pounds. Gross vehicle weight rating is 1,360 pounds. Gross axle weight rating is 500 pounds at the front and 927 pounds at the rear. Luggage capacity measures 4.8 cubic feet, supporting long-distance travel requirements.
Seat height when laden is 26.4 inches. Seat height when unladen is 29.1 inches. Measurements reflect a 180-pound operator weight for certified figures.
Suspension Geometry and Ride Control
Front suspension consists of 47-millimeter inverted 1x1 front forks providing 4.6 inches of travel. The inverted design increases front-end rigidity and enhances steering precision. The rear suspension uses dual adjustable emulsion shocks. The left shock includes remote preload adjustment, while the right shock incorporates threaded preload adjustment. Rear suspension travel measures 3 inches.
This suspension configuration allows riders to adjust preload settings according to passenger weight and luggage load. The geometry supports lean angles of 31 degrees on both the right and left sides, tested under SAE J1168 methodology.
Wheel and Tire Specifications
The motorcycle rides on Dual Grain, Chrome, 14-spoke wheels. The front wheel measures 19 inches in diameter and 3.5 inches in width. The rear wheel measures 18 inches in diameter and 5 inches in width. Tire equipment includes Dunlop® Harley-Davidson® Series bias blackwall tires. The front tire model is D408F with specification 130 over 60B19 M C 61H. The rear tire model is D407T with specification 180 over 55B18 M C 80H.
Integrated Braking and Control Systems
Front braking utilizes dual floating rotors measuring 12.6 inches in diameter and 0.18 inches in thickness. The calipers are 4-piston fixed dual radial mounted units. Rear braking uses a single axial mounted caliper with an 11.8-inch fixed rotor measuring 0.28 inches in thickness.
The anti-lock braking system is standard. Electronic Linked Braking is included. The system distributes braking force between front and rear wheels for controlled deceleration. The Traction Control System is included to manage rear wheel slip. The Drag-Torque Slip Control System is included to reduce wheel instability during deceleration and downshifting. Vehicle Hold Control is included to assist when stopped on an incline. The Tire Pressure Monitoring System is included for monitoring inflation levels.
Cornering Enhanced Anti-Lock Braking System is included. Cornering Enhanced Electronic Linked Braking is included. Cornering Enhanced Traction Control System is included. The Cornering Drag-Torque Slip Control System is included. These systems adjust braking and traction response based on lean angle input to maintain stability during cornering.
Electrical Output and Lighting Systems
The electrical system features a sealed, maintenance-free 12-volt battery rated at 28 amp-hours with 405 cold cranking amps. Charging is managed by a three-phase 58-amp system capable of 754 watts maximum output at 13 volts. Starting is handled by a 1.6-kilowatt electric starter with solenoid shift motor engagement.
Lighting components include LED headlamps, LED tail and stop lamps, LED front signal lights, and LED rear turn signals. LED technology improves visibility and reduces power consumption. Gauges are digital and integrated within the display system.
A 15-watt USB-C electric power accessory port is located in the media storage box, supporting device charging during travel.
Skyline™ OS Infotainment and Connectivity Platform
The infotainment system operates on Skyline™ OS and is displayed through a 12.3-inch full-color TFT screen measuring 312 millimeters. The system integrates digital gauges and vehicle information displays, including air temperature, oil pressure, and Engine Idle Temperature Management System status.
The audio system includes six speakers. Two 6.5-inch speakers are mounted in the fairing. Two 6.5-inch speakers are located in the Tour-Pak®. Two 6.5-inch speakers are positioned in the lower fairings. Output is rated at 125 watts per channel for four channels and 150 watts per channel for two channels.
AM and FM radio are standard. SD card, flash drive, and MP3 functionality are supported via USB connection. Bluetooth® connectivity supports phone, media player, and headset integration. Apple CarPlay® is available through a wireless or wired connection. Navigation is embedded and operates through Bluetooth® integration with traffic and weather support via Wi-Fi hotspot subscription in the United States. Rider and passenger intercom functionality is standard, with VOX capability available for Harley-Davidson® headsets. The compatible headset model is the Harley-Davidson® Packtalk Edge wireless Bluetooth® headset.
Schedule a Test Ride Today
We invite riders to experience the technical precision of the 2026 Harley-Davidson® CVO™ Street Glide® Limited in person at Tower's Frontier Harley-Davidson® in Lincoln, NE. A scheduled test ride allows you to assess the 139 foot-pounds of torque delivery, evaluate the calibration of the 6-Speed Cruise Drive® transmission, and observe the function of the cornering-enhanced braking and traction systems under controlled conditions. You can review the responsiveness of the 47-millimeter inverted front forks and adjustable rear suspension while monitoring system data through the 12.3-inch Skyline™ OS display. This model integrates advanced rider safety technologies, high-output audio capability, and precise drivetrain engineering into a single touring platform. Contact our team to arrange your test ride and examine the complete specification set directly from the rider position.