The 2026 Harley-Davidson® CVO™ Road Glide® ST is engineered as a performance-focused touring motorcycle with clearly defined specifications across powertrain, chassis, and integrated systems. The model designation FLTRXSTSE reflects its alignment with the CVO™ lineup, which incorporates high-output engine tuning, advanced suspension adjustability, and a fully integrated infotainment system. The motorcycle measures 94.9 inches in length, 36.4 inches in overall width, and 50.4 inches in height. A wheelbase of 64 inches supports stability during sustained highway operation while maintaining predictable steering response. The laden seat height is 27.5 inches, and the unladen seat height is 28.3 inches, contributing to a low center of gravity and controlled rider positioning.
Static ground clearance is measured at 5.1 inches, allowing for consistent lean angles of 31 degrees on both sides. The rake angle is set at 26 degrees, with a fork angle of 29.25 degrees and a trail measurement of 6.7 inches. These geometric values influence directional stability and cornering behavior. The motorcycle is equipped with Dunlop® Harley-Davidson® Series tires, including a 130/60B19 front tire and a 180/55B18 rear tire, selected to support traction and load-bearing requirements.
Engine Configuration and Output Characteristics
The Milwaukee-Eight 121 High Output engine defines the mechanical capability of the model. This V-twin engine has a displacement of 121 cubic inches or 1,977 cubic centimeters, achieved through a bore of 4.075 inches and a stroke of 4.6 inches. The compression ratio is set at 11.4 to 1, which supports efficient combustion and consistent power delivery.
The engine produces 127 horsepower at 4,900 rpm and generates 145 foot-pounds of torque at 4,000 rpm. Torque measurement follows the J1349 standard, ensuring consistency in reported performance data. The pushrod-operated valve train includes overhead valves with four valves per cylinder and hydraulic self-adjusting lifters. This configuration reduces maintenance requirements while maintaining valve timing precision.
Fuel delivery is managed through Electronic Sequential Port Fuel Injection. This system meters fuel based on engine demand, improving efficiency and throttle response. The air intake uses a fiberglass, washable air cleaner designed for durability and filtration efficiency. Exhaust gases are routed through a 2-1-2 dual exhaust system with tapered mufflers, which supports balanced exhaust flow.
Lubrication is handled by a pressurized dry-sump system. This system stores oil separately from the crankcase and ensures consistent lubrication under varying operating conditions. Engine oil capacity with filter is 5 quarts, supporting extended operation between service intervals.
Transmission, Clutch System, and Gear Ratios
Power transfer is managed through a combination of chain-driven and belt-driven components. The primary drive uses a chain with a 34 to 46 ratio. Final drive is delivered through a belt system with a 30 to 68 ratio, reducing maintenance requirements and operating noise.
The 2026 Harley-Davidson® CVO™ Road Glide® ST is equipped with a 6-Speed Cruise Drive® transmission. Gear ratios are structured to provide both acceleration and efficient cruising. First gear has an overall ratio of 10.233, while second through sixth gears are 7.093, 5.268, 4.266, 3.635, and 3.067 respectively. This progression allows for controlled power delivery across a wide speed range.
The clutch is a mechanically actuated 10-plate wet design with Assist and Slip functionality. The assist feature reduces lever effort during operation. The slip function helps control rear wheel behavior during downshifting by moderating engine braking forces.
Frame Construction and Structural Integrity
The frame of the 2026 Harley-Davidson® CVO™ Road Glide® ST is constructed from mild steel using a tubular configuration. It includes a two-piece stamped and welded backbone with cast and forged junctions. Twin down tubes enhance rigidity, and a bolt-on rear frame supports serviceability and modular replacement.
The swingarm is also fabricated from mild steel, using a two-piece drawn and welded design with forged junctions. This construction supports rear suspension alignment and load distribution. The structural design prioritizes durability while maintaining predictable handling under varying loads.
Suspension System and Travel Specifications
Front suspension consists of 47 millimeter inverted forks. These forks include adjustable preload, compression damping, and rebound damping. This level of adjustability allows riders to modify suspension characteristics to match load conditions and road surfaces.
Rear suspension uses an emulsion shock system with adjustable preload, compression damping, and rebound damping. Suspension travel measures 4.6 inches in the front and 3 inches in the rear. These values are calibrated to balance ride comfort with controlled handling during cornering and braking.
The combination of adjustable front and rear suspension components allows for consistent chassis response. The system supports both touring stability and performance-oriented riding inputs.
Braking System Design and Functional Integration
The braking system of the 2026 Harley-Davidson® CVO™ Road Glide® ST incorporates dual front and single rear configurations. The front uses 4-piston fixed calipers mounted radially, paired with dual floating rotors measuring 12.6 inches in diameter and 0.18 inches in thickness. The rear brake uses a single axial-mounted caliper with an 11.8-inch rotor and a thickness of 0.28 inches.
Wave-style rotor design improves heat dissipation and reduces brake fade during extended use. The system includes Anti-lock Braking System functionality as standard equipment. This system prevents wheel lockup during sudden braking events.
Electronic Linked Braking distributes braking force between front and rear wheels. This improves stability and reduces the likelihood of uneven braking forces. These systems work together to provide controlled deceleration under varying conditions.
Electrical System and Power Distribution
The electrical system uses a sealed, maintenance-free 12-volt battery rated at 28 amp-hours and 405 cold cranking amps. Charging is managed by a three-phase 58-amp system, capable of generating up to 754 watts at 13 volts.
Starting is performed by a 1.6 kilowatt electric starter with solenoid shift engagement. This system provides reliable ignition under varying environmental conditions.
Lighting components include an LED headlamp, LED tail and stop lights, and LED turn signals. LED technology reduces power consumption and increases visibility. The motorcycle also includes a USB-C power outlet rated at 15 watts, located in the media storage compartment.
Infotainment System and Connectivity Features
The infotainment system operates on Skyline™ OS and is displayed on a 12.3-inch full-color TFT screen. The display integrates digital gauges and vehicle information, including air temperature, oil pressure, and engine management data.
Audio output is delivered through two 6.5-inch speakers mounted in the fairing. Each channel is rated at 125 watts, supporting clear audio output. The system includes AM and FM radio functionality and supports media playback through USB connections.
Bluetooth® connectivity enables hands-free phone operation and media streaming. Apple CarPlay® compatibility is available through wired or wireless connections. The system also includes embedded navigation with traffic and weather updates supported through Wi-Fi connectivity.
USB-C and MTP compatibility allow connection with smartphones and external storage devices. The infotainment system is structured to provide integrated control of navigation, communication, and entertainment functions.
Rider Assistance Systems and Control Technologies
The 2026 Harley-Davidson® CVO™ Road Glide® ST includes multiple electronic rider assistance systems designed to support traction and braking control. Anti-lock Braking System and Electronic Linked Braking operate in conjunction with Traction Control System and Drag-torque Slip Control System.
Vehicle Hold Control assists during stationary operation on inclines by maintaining brake pressure. The Tire Pressure Monitoring System provides continuous monitoring of tire conditions.
Cornering-enhanced systems adjust functionality based on lean angle. These include Cornering Anti-lock Braking, Cornering Electronic Linked Braking, Cornering Traction Control, and Cornering Drag-torque Slip Control. These systems are calibrated to maintain stability during cornering maneuvers.
Capacity, Fluids, and Operational Metrics
Fuel capacity is set at 6 gallons, with a reserve capacity of 1 gallon indicated through a warning system. Fuel economy is estimated at 44 miles per gallon under combined conditions. These values support extended travel without frequent refueling.
The 2026 Harley-Davidson® CVO™ Road Glide® ST has an as-shipped weight of 800 pounds and a running order weight of 838 pounds. Gross Vehicle Weight Rating is 1,360 pounds, with front and rear axle ratings of 500 pounds and 927 pounds, respectively.
Fluid capacities include 5 quarts of engine oil, 1 quart of transmission fluid, and 1.1 quarts for the primary chain case. Coolant capacity is 0.82 quarts. Luggage volume is measured at 2.42 cubic feet, supporting storage requirements for extended riding.
Schedule a Test Ride at Tower's Frontier Harley-Davidson®
Riders seeking to evaluate the engineering and performance characteristics of the 2026 Harley-Davidson® CVO™ Road Glide® ST can schedule a test ride at Tower's Frontier Harley-Davidson® in Lincoln, NE. This allows direct assessment of the Milwaukee-Eight 121 High Output engine, including torque delivery and throttle response across different riding conditions. The suspension system can be evaluated for adjustability and ride control, while braking performance can be observed through controlled deceleration. The infotainment interface and connectivity features can also be reviewed during operation. Scheduling a test ride provides a structured opportunity to examine how the motorcycle’s technical systems function together in a riding environment.